Air Oil Separator 250034-122 for Sullair

Air Oil Separator 250034-122 for Sullair Description

The Air Oil Separator 250034-122 for Sullair is a primary separator element designed for compatible Sullair air compressor systems. It separates oil from compressed air and supports cleaner air delivery while helping return separated lubricant to the compressor system. Regular separator replacement helps maintain separation performance and control oil carryover during compressor operation. Sullair Part Number 250034-122 is identified as KIT, ELEMENT PRIMARY 25-200.

Air Oil Separator 250034-122 Function

The Air Oil Separator 250034-122 for Sullair separates entrained oil from compressed air before the air leaves the compressor system. Effective primary separation helps reduce oil carryover, support oil recovery, and maintain stable compressor operation.

Air Oil Separator 250034-122 for Sullair Replacement Solutions

01 — Oil Carryover

A worn separator can allow more oil to pass into the compressed air system, increasing oil consumption and downstream contamination. Replacing the Air Oil Separator 250034-122 for Sullair helps restore oil separation and control carryover.

02 — Separation Performance

Separator media can become loaded or degraded during extended operation, reducing its ability to separate oil from compressed air. Timely replacement helps maintain effective separation and supports consistent compressor performance.

03 — Service Interval

Extended use can reduce separator performance as the element accumulates contaminants and oil. A commonly recommended replacement interval is annually or around 8,000 operating hours, but the actual interval should follow the compressor manufacturer’s maintenance requirements and operating conditions.

04 — Fitment

Using the wrong separator can cause installation and performance problems. Match Sullair Part Number 250034-122 with the equipment parts manual and verify the compressor model before ordering.

FAQs from Air Oil Separator 250034-122

01 — What is the Air Oil Separator 250034-122 used for?

This primary air/oil separator element removes oil from compressed air inside compatible Sullair air compressor systems.

02 — How often should I replace the Air Oil Separator 250034-122 ?

The reference replacement interval is annually or every 8,000 operating hours. Actual service timing depends on the compressor model, operating conditions, and manufacturer’s maintenance recommendations.

03 — What happens if the Air Oil Separator 250034-122  is not replaced on time?

A worn or loaded separator can increase oil carryover and oil consumption and may affect overall separation performance. Timely replacement helps maintain effective oil separation.

04 — How can I confirm the correct Air Oil Separator 250034-122?

Check Sullair Part Number 250034-122 against your equipment parts manual. For verification, provide the compressor model, serial number, and the part number currently installed.